|
VibeHound Datalogger
Model 7016
|
Input Specifications
-
Piezoelectric Sensor Element
-
25g Peak Full Scale Range
-
0.0006g RMS Spectral Noise Floor
-
0.4 Hz to 12,000 Hz Frequency Response
DSP Specifications
-
125 Hz to 65K Hz Sampling Rate
-
16 bit resolution
-
128K byte Data Storage
-
Programmable Data Form
- Time Waveform
- Filtered Time Waveform
- 50 - 1,000 Hz band
- 500 - 10,000 Hz band
Communication Specifications
-
USB 1.1 (low speed device, 3m cable)
-
USB 2.0 (full speed device, 5m cable)
-
MIL-C-26482 Connector (four pin)
General Specifications
|
|
Description
The 7016 is an accelerometer and data logger in a single package, which
communicates to a host device through a standard USB connection. The unit
contains a piezoelectric accelerometer, constant current power source,
amplifier, filter, microcontroller, data memory, and USB client
transceiver. The data collection parameters are configured from a host device
such as a handheld computer or laptop.
The 7016 responds to a simple list of protocol commands such as
wakeup, sleep, EEPROM request and data request. Data is provided in binary
form and can be easily converted to time trace in engineering units through
the use of our Windows XP application or a LabView Virtual Instrument. Both
are included on the software installation CD ROM.
Performance (Tc
= 25º C unless otherwise specified)
|
Parameter |
Min. |
Typ. |
Max. |
Units |
| Number of Axes |
|
1 |
|
Z |
| Full Scale Range |
|
25 |
|
g |
| Calibration Accuracy (stored in on board
EEPROM) |
-3 |
|
+3 |
% |
| Acceleration Sensitivity (spectral) |
|
0.0006 |
|
g |
| Frequency Response (± 3 dB) |
0.4 |
|
12,000 |
Hz |
| Frequency Response (± 5%) |
3 |
|
2,500 |
Hz |
| Amplitude Nonlinearity |
|
1 |
|
% |
| Transverse Sensitivity |
|
5 |
|
% |
| A/D Resolution over Selected Range |
|
16 |
|
Bits |
| Sampling Rate |
125 |
|
65,000 |
Hz |
| Storage Size |
20 |
|
50,000 |
Samples |
| Max. Mechanical Shock |
|
|
2,500 |
g |
Sensitivity over Temperature
(-40º
C to 85º
C) |
|
3 |
|
% FSO |
| Damping Ratio of Accelerometer Element |
0.4 |
0.7 |
0.9 |
N/A |
| Power (from USB line) |
4.35 |
|
5.25 |
V |
| Current Draw when in Active Mode |
|
40 |
|
mA |
| Current Draw when in Idle Mode |
|
15 |
|
mA |
| Current Draw when in USB Suspend Mode |
|
250 |
500 |
µA |
| Weight |
|
8.6 |
|
oz |
| Tightening Torque |
22 |
24 |
28 |
in-lb |
| Operating / Storage Temperature |
-40 |
|
85 |
º C |
Ordering Information
Part Number:
7016000-1, Standard
version, USB Accelerometer, Z-Axis, 25g,
316 stainless steel case
7016010-1, USB cable,
straight, 15 foot length, MIL-C-26482 in-line to
USB Series A
7016020-1, USB cable, coiled, 6 foot extended length, MIL-C-26482
in-line to
USB Series A
7016030-1, USB cable,
coiled, 6 foot extended
length, MIL-C-26482 right-angle to
USB Series A
Datasheet in PDF
Request Additional Information
|
