Features
Active Repeater for 914 MHz Digital Wireless Network
Selectively Repeats Techkor Wireless Products
-
Battery Powered
Encrypted Retransmission
Solid State, No Moving Parts
-
IP65, NEMA 4 Package
Description
The solid-state 7032 repeater is used when
wireless sensors are out of range of 7031 Network Access Points (NAPs). This can occur if a
7034 wireless sensor is greater than 250 feet from the NAP or if some
object is shielding the RF signal. Techkor wireless sensors and NAPs will use repeaters when necessary. No additional setup is required.
Simply placing a repeater in the wireless network will allow the devices to
have access to it.
The 7032 is an extremely reliable wireless
device. The repeater will only receive and repeat packets to and from Techkor wireless sensors. Handshaking, packet framing, collision avoidance,
packet encoding, and error checking are all performed automatically. For
maximum confidence, the 7032 performs periodic self-test diagnosis of
power fluctuations, low battery, or harmful internal temperatures. Should
operating parameters be exceeded, the unit will either alert the operator
wirelessly or self-initiate a system reset.
Performance (Tc
= 25º C unless otherwise specified)
|
Parameter |
Min. |
Typ. |
Max. |
Units |
|
Transceiver Operational
Frequency |
|
914.50 |
|
MHz |
| Radiated Power (ERP) |
|
|
0 |
dBm |
| Receiver Sensitivity |
|
-100 |
|
dBm |
| Wireless Data Rate |
|
|
65 |
Kb/s |
| Wireless Range |
|
250 |
|
feet |
| Weight |
|
100 |
|
grams |
| Operating Temperature |
0 |
|
50 |
º C |
| Storage Temperature |
-20 |
|
70 |
º C |
| Operating Humidity, non-condensing |
5 |
|
95 |
% |
